Contact Supplier

Mr. Zhang Yu
Leave a messagePayment Type: | L/C,T/T |
---|---|
Min. Order: | 1 Set/Sets |
Delivery Time: | 10 Days |
Additional Info
Transportation: Ocean,Land
Product Description
Shock absorber is mounted on the drill column close to the drill bit. In the drilling process, it can also reduce or absorb the vertical and radial vibration of the drill column, and
eliminate the shock loads to reduce the damage of the bit, drilling tool and ground equipment, and to achieve the best combination of drill bit pressure and revolving speed, which protects the down hole motor and ensures long service life of it.
Principle: Downhole motor is a kind of downhole dynamic drilling tool upon the power of drilling mud. Mud stream from the outlet of mud pump flows through a by-pass valve into the motor. This stream produces pressure loss at both inlet and outlet of the pump to push the rotor into rotating, and to transmit the torque and speed onto the bit. The downhole motor property mainly depends upon its property parameters.
Constitution: Downhole motor is composed of five assemblies: by-pass valve, motor, anti-drop, cardan shaft and drive shaft.
The down-hole motor is a positive-displacement down-hole motor. It converts the high pressure fluid power of the mud into the mechanical energy of drill bit rotation. The motor is widely used in the drilling, making inclination, adjusting azimuth, coring, reaming, side tracking and work over for the directional wells, horizontal wells side tracked wells and straight wells of oilfields and coal mines. In addition, it is suitable for compound drilling and traversing and other special works.
Table for shock absorbing Downhole Motors' specifications and models:
Code of motor Unit 5LZ185×7.0 7LZ185.5×7.0 5LZ197×7.0 5LZ197.5×7.0 5LZ203×7.0 Recommend Hole Size mm 215-244 215-244 244-311 244-311 244-311 Recommend Hole Size in 81/8-95/8 81/8-95/8 91/8-123/6 95/8-121/8 95/8-121/4 Input flow Rate L/S 20-35 20-35 20-40 20-40 20-40 Motor Pressure Loss MPa 4 4 3.2 4 3.2 Speed of the Bit r/min 184 173 61-122 85-160 70-155 Working Torque N.m 5436 5939 8067 7223 7002 Delay Dynamic Torque N.m 8154 8908 14118 12640 12289 Output Power KW 80-140 80-140 57.6-115.2 72-144 57.6-126.7 Recommend Drilling Weight KN 120 120 120 130 150 Maxing Drilling Weight KN 240 240 240 260 240 Thread Connection Top 41/2REG 41/2REG 51/2REG 51/2REG 51/2REG 63/8REG 63/8REG 63/8REG Thread Connection Bottom 61/2REG 61/2REG 63/8REG 63/8REG 63/8REG The Drill Length mm 8120 8090 7998 8980 8100
Code of motor Unit 5LZ203.5×7.0 5LZ216×7.0 5LZ216.5×7.0 5LZ244×7.0 7LZ244.5×7.0 Recommend Hole Size mm 244-311 273-323 273-323 311-445 311-445 Recommend Hole Size in 95/8-121/4 103/4-123/4 103/4-123/4 121/2-171/2 121/2-171/2 Input flow Rate L/S 20-40 22-48 22-48 50-75 50-75 Motor Pressure Loss MPa 4 3.2 4 3.2 4 Speed of the Bit r/min 70-155 61-138 61-138 91-136 91-136 Working Torque N.m 8778 8895 11117 15124 18905 Delay Dynamic Torque N.m 15362 15567 19455 26468 33085 Output Power KW 72-158.4 63.36-138.29 79.2-172.8 144-216 180-270 Recommend Drilling Weight KN 170 190 238 200 250 Maxing Drilling Weight KN 260 300 378 360 450 Thread Connection Top 51/2REG 63/8REG 63/8REG 63/8REG 63/8REG 63/8REG Thread Connection Bottom 63/8REG 63/8REG 63/8REG 73/8REG 73/8REG The Drill Length mm 8990 8100 8950 9480 10280
We look forward for your cooperation.
Product Categories : Drilling Motors > Motors For Drilling
Hot Products